Automobile maintenance products introduction

2024-09-19 10:58:37

First, the lubrication system to deepen maintenance

Engine internal cleaning agent:

Dissolve and remove dirt, avoid secondary pollution of new oil, non-corrosive, the engine will not be damaged during cleaning. Solve the problems caused by oil oxidation deterioration, excessive engine wear and friction resulting in short oil change cycle, piston ring loss of elasticity, noise and so on.

Engine internal cleaning agent is a combination of basic raw materials of lubricating oil, adding detergent and dispersant. The flash point of the product is high, does not change the composition of the lubricating oil, and has no harm to the engine for long-term use.

Engine protectant:

Engine protectant added the company's unique United States magnetic suspension boron molybdenum combination performance, high temperature resistance of 1400 degrees, especially for the turbocharger engine, can greatly reduce the probability of damage to the turbocharger. It is not easy to coking and carbon deposit, and inhibits the formation of sludge and carbon deposit. The unique anti-wear protection greatly reduces cold start wear

Can greatly reduce engine wear (80%). Perfect balance with oil miscibility and compatibility without any side effects. It can improve the protection performance of oil in harsh working environment. Protect engine and extend engine life. Boost power and save fuel.

New car running-in protectant:

New cars, vehicles that have just been overhauled and vehicles that have been replaced with new engines require a certain mileage for running-in due to the processing accuracy of parts and errors in the assembly process. Many owners due to driving habits and driving methods are not correct, but also easy to make the car in the run-in period problems.

This new car running-in protective agent can avoid the rough surface and running-in metal particles on the surface of the machine during the running-in period, reduce hard friction and abnormal wear, so that the friction surface becomes smoother and closer, and improve the running-in quality.

Second, fuel system deepening maintenance

Nozzle cleaner

The olefin in gasoline occurs autooxidation reaction, forming oligomeric goo, that is, gum. After the nozzle stops working, the glue is baked and melted to condense on the annular gap, which accumulates to form carbon deposit over time. When the engine is turned off, the gasoline ejected can not be recovered, and the wax and gum in the gasoline are thicker and thicker, and the carbon deposit is formed after repeated heat hardening; The carbon deposit of 6/1000 mm thick in the annular gap of the nozzle will reduce the nozzle oil volume by 26%......

For these problems, the use of nozzle cleaning agent with professional no-disassembly cleaning equipment to clean the carbon deposits in the nozzle, intake valve and combustion chamber can improve the spray atomization effect and improve the engine performance

Effectively solve the problem of slow car start and increased fuel consumption.

Fuel protectant:

Clean all fuel line systems including fuel tanks.

With super water removal function.

Sludge, gum and carbon deposits in the entire oil circuit of the vehicle cleaning equipment, including the fuel tank. Remove the moisture and flocculent in the gasoline tank to solve the problem of power drop and fuel consumption increase caused by the blockage of the fuel system.

Third, the intake system to deepen maintenance

Intake system cleaner:

Efficient and fast cleaning of throttle, inlet, inlet valve, combustion chamber and other parts.

Efficient dissolution of carbon deposits.

When the engine is turned off, the intake valve of some cylinders cannot be completely closed. Carbon ring in the exhaust gas recirculation system, air return containing oil vapor in the crankcase ventilation system, and air return containing oil vapor in the fuel steam control system. Resulting in carbon deposits. It affects the inlet effect and the air-fuel ratio of the mixture. Blocking the idle channel causes the idle control device to stall or exceed its adjustment range.

The intake system cleaner can completely remove the glue and carbon deposits in the throttle, the intake tube wall, etc. Improve the intake performance, restore the normal air-fuel ratio, and make the engine performance more stable.

Throttle valve cleaner:

Efficient and fast cleaning of throttle and inlet. Efficient dissolved carbon deposition.

Lubricate the inner wall of the throttle to effectively inhibit the secondary generation of carbon deposits.

Due to the long-term driving of the vehicle, due to the influence of environmental factors such as road conditions and air, a large amount of carbon deposits will be formed on the throttle. As a result, the intake effect and the quality of the mixture are affected, and the idle channel is blocked so that the idle control device is stuck or beyond its adjustment range. Throttle cleaning agent can completely remove the glue and carbon deposits in the throttle valve, intake tube wall, etc., improve the intake performance, restore the normal air-fuel ratio, and make the engine performance more stable.

Four, Vehicle maintenance equipment

Three-way catalytic cleaning agent:

Sulfide and phosphide are easy to be deposited on the three-way catalytic device, and when the fuel combustion is insufficient to produce a large number of unburned materials adsorbed by the three-way catalytic converter, a complex chemical complex complex will be formed on its surface, and a blockage will be formed on the three-way catalytic converter, resulting in the blockage failure of the three-way catalytic converter, the tail gas is excessive, and the three-way catalytic converter will be sintered and damaged in serious cases. The exhaust is not smooth, resulting in a series of problems such as reduced power and increased fuel consumption

The establishment of high temperature oxidation environment in the three-way catalyst, the sulfur and phosphorus chemical complexes attached to the three-way catalyst to oxidize sulfur oxides, carbon dioxide gas discharge, can play a catalytic role in reducing the three-way catalyst, reduce the sintering carbon oxidation decomposition temperature, so that the coking blockage is completely oxidized and decomposed into gas discharge.

Fifth, the cooling system to deepen maintenance

Tank cleaning agent:

More than 50% of the world's engine failures come from the cooling system, and more than 70% of the cooling system has scale and rust, which seriously affects the function of the cooling system. Ethylene glycol is highly corrosive to metals such as water tanks

When the preservative fails, it will cause corrosion of parts such as radiator, engine jacket, water pump and pipeline.

Excessive scale and rust will overheat the engine, cause the engine oil viscosity to become smaller, reduce the lubrication effect, increase wear, affect the cylinder capacity, reduce the engine power, and shorten the service life of the engine. Water tank cleaning agent quickly and effectively clean water tank rust, no acid, alkali, no need to neutralize.

Tank protectant:

Ethylene glycol is highly corrosive to metals such as water tanks. If the preservative fails, it will cause corrosion of components such as radiators, water jackets, water pumps, and pipes. The tank protector can create a layer of anti-rust protective film on the metal surface, neutralize the acid in the water, prevent the corrosion of acidic substances, lubricate the pump and thermostat, and extend the life of the cooling system components.

Six, air conditioning system to deepen maintenance

Air conditioning system cleaning agent:

Car air conditioning can not avoid the growth of mold on the evaporator, air conditioning mold is the main source of air pollution in the car. There will also be more or less odor in the car, including the smell of the new car's interior. Mold will cause harm to the human body (dermatitis, influenza, asthma, headache and fever, etc.) affect people's health and affect people's riding comfort.

Air conditioning system cleaning agent can quickly kill the harmful bacteria such as mold in the air conditioning system, can quickly remove the air conditioning odor, eliminate the odor caused by smoking, food, etc.

Air conditioning synergist:

The air conditioning system is used for a long time, and the wear of the compressor is too large, and the refrigeration effect will be reduced. It causes the air outlet temperature to rise, compressor noise to increase, fuel consumption to increase, and power to drop. Air conditioning enhancer can effectively improve the refrigeration effect of air conditioning, reduce the temperature of the outlet, save fuel, improve power, extend the service life of the compressor, and improve the refrigeration effect of air conditioning.